Filter the use of half masks
two filters: type p3; according to en 14387
The filter is cylindrical (diameter 79 mm) with a black body. The filter consists of
two white fabric filter discs in the inner surfaces.
Application
Ideal for full protection in areas (oxygen concentration with volume above 17%) with contaminated
Gases and vapours with a boiling point above 65°C (e.g. solvents or paint) and organic chemicals.
Technical data - Mask
Breathing resistance:
- sinusoidal: 25 x 2 l / min
- Inhalation: 0.52 mbar
- Exhalation: 1,64 mbar
- continuous inhalation:
- at 30 l / min: 0.11 mbar
- At 95 l / min: 0,33 mbar
- co2 content (dead space): 0,6%
- Standards: UNe-en 140: 1992
- UNe-en 141: 1992
- Directive 89/686/eWG
marking of respiratory protection filters
| identification colour
|
Type |
Area of application |
| brown |
A |
Organic gases and vapours
with boiling point > 65 °C |
| brown |
ax |
Low-boiling organic compounds
(boiling point = 65 °C) of low-boiling groups 1 and 2 |
| grey |
B |
Inorganic gases and vapours
z. E.g. chlorine, hydrogen sulphide, hydrocyanic acid |
| yellow |
e |
Sulphur dioxide, hydrogen chloride
and other acid gases |
| green |
k |
Ammonia
and organic ammonia derivatives |
| blue |
no |
Nitrous gases
(nitrogen oxides) e.g. no, no2 |
| red |
Hg |
Mercury |
| black |
co |
carbon monoxide |
| orange |
Reactor |
Radioactive iodine
and radioactive iodomethane |
| purple |
SX |
Gas and vapours as specified by the manufacturer |
| white |
P |
Particles |
Filter classes (adsorption capacity)
Each filter also carries an indication of the filter class, as the filters are predominantly divided into three classes (1: low to 3: high) according to their adsorption capacity. The class indicates how much the mak (maximum workplace concentration) may be exceeded.
For gas filters a, b, e and k, the maximum gas concentration in class 1 is 1000 ml/m³ (0.1 vol-%), in class 2 5000 ml/m³ (0.5 vol-%) and in class 3 10000 ml/m³ 1 vol-%). There are different maximum periods of use depending on the maximum concentration and the substance (classification according to boiling point). For protection against group 1 substances, the filter may be used for a maximum of 20 minutes at concentrations of 500 ml/m³ and a maximum of 40 minutes at concentrations of 100 ml/m³. Against substances of group 2 the wearing time is limited to 20 minutes at concentrations up to 5000 ml/m³ and 60 minutes at 1000 ml/m³. For the filters No, Hg, Co and Reactor, the manufacturer's specifications regarding duration of use and concentration must be observed. Filter no may be used for a maximum of 20 minutes, filter Hg for a maximum of 50 hours.
Lowest breakthrough time in minutes
| class
|
Minimum capacity in grams |
Minimum breakthrough time in minutes
|
| 1 |
15,4 |
80 |
| 2 |
38,4 |
40 |
| 3 |
115,2 |
60 |
one-way Reusable
| |
FFP1 |
FFP2 |
FFP3 |
A1 |
A2 |
ABe |
ABek |
Grinding/Cutting/Drilling |
|
|
|
|
|
|
|
| Rust |
x |
x |
|
|
|
|
|
| Cement |
x |
x |
|
|
|
|
|
| Putty/Filler |
x |
x |
|
|
|
|
|
| Masonry/Concrete |
x |
x |
|
|
|
|
|
| Wood |
|
x |
x |
|
|
|
|
| Colours/varnishes |
x |
x |
|
|
|
|
|
| Anti-rust coatings |
|
x |
x |
|
|
|
|
| Anti-fouling lacquers |
|
|
x |
|
|
|
|
| Stone, quartz under mak-GW |
x |
x |
|
|
|
|
|
| Stone, quartz over mak-GW |
|
x |
|
|
|
|
|
| iron |
x |
x |
|
|
|
|
|
| High alloy steel |
|
x |
|
|
|
|
|
| cobalt/beryllium |
|
x |
x |
|
|
|
|
| cooling lubricant mist |
|
x |
x |
|
|
|
|
| Welding |
|
|
|
|
|
|
|
| unalloyed materials |
|
x |
x |
|
|
x |
|
| high-alloy materials |
|
|
x |
|
x |
|
|
| Zinc |
|
x |
x |
|
|
x |
|
| Soldering |
|
x |
|
|
|
|
|
| Asbestos (small-scale work) |
|
x |
x |
|
|
|
|
| Processing of glass/mineral fibres |
|
x |
x |
|
|
|
|
| Syringes |
|
|
|
|
|
|
|
| Dispersion paint |
|
x |
x |
|
x |
|
|
| synthetic resin lacquers |
|
|
|
|
x |
|
|
| Isocyanates - solvent based |
|
|
|
|
x |
x |
|
| Plant protection products |
|
|
|
|
|
|
|
| aqueous solution |
|
x |
x |
|
|
|
|
| organic/evaporative |
|
|
|
|
x |
|
|
Varnish/Paint |
|
|
|
|
|
|
|
| solvent-based coatings |
|
|
|
x |
x |
|
|
| water-miscible lacquers (containing solvents) |
|
|
|
x |
x |
|
|
| Pickling |
|
|
|
|
|
|
|
| organic solvents |
|
|
|
|
x |
|
|
| ammoniacal |
|
|
|
|
|
|
x |
| glue |
|
|
|
|
|
|
|
| solvent-based |
|
|
|
x |
x |
|
|
Dealing with |
|
|
|
|
|
|
|
| Sulphur dioxide |
|
|
|
|
|
x |
x |
| Hydrogen chloride |
|
|
|
|
|
x |
x |
| Mould/Fungi |
|
x |
|
|
|
|
|
| Bacteria |
|
x |
|
|
|
|
|
| Diesel soot/smoke |
|
x |
|
|
x |
|
|
| Cleaning |
|
|
|
|
|
|
|
| White spirit/nitro thinner |
|
|
|
|
x |
|
|
